home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.20010921-20020314
/
000135_grinder@no.spam.maam.com_Fri Nov 9 09:11:03 EST 2001.msg
< prev
next >
Wrap
Text File
|
2002-03-13
|
2KB
|
83 lines
Article: 12954 of comp.protocols.kermit.misc
Path: newsmaster.cc.columbia.edu!panix!bloom-beacon.mit.edu!pln-e!spln!dex!extra.newsguy.com!newsp.newsguy.com!enews4
From: "Grinder" <grinder@no.spam.maam.com>
Newsgroups: comp.protocols.kermit.misc
Subject: Re: INPUT Initialization Error
Date: Thu, 8 Nov 2001 19:32:38 -0600
Organization: http://extra.newsguy.com
Lines: 65
Message-ID: <9sfc9v025s2@enews4.newsguy.com>
References: <9scp19217r7@enews2.newsguy.com> <9se35i$ip6$1@newsmaster.cc.columbia.edu>
NNTP-Posting-Host: 216-166-242-158.grics.net
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.50.4522.1200
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200
Xref: newsmaster.cc.columbia.edu comp.protocols.kermit.misc:12954
Ok, I think I nearly have this whipped. Your advice has been
great. If you're up for a bit more, I could stand a sanity
check.
In particular, I'm unsure about the order of the modem
configuration commands. I noticed in the K96custom.ini that
gets installed, that it first sets modem type to "none," before
applying the tapi parameters retrieved during setup. I guessed
this was because setting values could trigger code that would
act on an incomplete configuration. By declaring "none," the
logic would bypass those reactions?
This is the top part of my script, does it look reasonable?
Thanks again for your efforts.
______________________
define \%n 1-877-208-6005
define \%u xxx
define \%p xxx
define \%m Creative_Modem_Blaster_Flash56_PCI_DI5630-4
define \%t tapi
define \%a COM3
define \%b 115200
define \%c on
define \%d off
; begin
boilerplate - - - - - - - - - - - - - - - - - - - - - - - - - -
- - -
; Show extra status information
log debug debug.log
log session session.log
; set dial display on
; Configure the modem
if def \%t { set modem type \%t }
if def \%a { set port \%a }
if def \%b { set speed \%b }
if def \%c { set carrier-watch \%c }
; Additional TAPI configuration
if def \%m {
if def \%d { set tapi modem-dialing \%d }
set tapi line \%m
if failure {
echo \13\10ERROR: could configure modem\13\10
goto HANGUP
}
}
:DIALMCK
dial \%n
if failure {
echo \13\10ERROR: dial unsuccessful\13\10
goto HANGUP
}
pause 5
; attempt login ...